Re: Tube/Valve Amp Noise (attention Alan and Iain)

"roughplanet" <roughplanet@[EMAIL PROTECTED]
> wrote in message 
news:4813f882$0$1026$afc38c87@[EMAIL PROTECTED]
> "Trevor Wilson" <trevor@[EMAIL PROTECTED]
> wrote in message 
> news:67hrpfF2ovr4cU1@[EMAIL PROTECTED]
>
> "Patrick Turner" <info@[EMAIL PROTECTED]
> wrote in message
> news:4813556D.630051DD@[EMAIL PROTECTED]
>
>>> I never read what Trevor says about ME amps or the way transistors are
>>> matched because its all empty sales talk and utter BS.
>
>> **Read the above very carefully. THIS is exactly what I am talking
about. 
>> Every tech on the planet claims to know more about ME amplifiers than 
>> Peter Stein does. They WILL NOT fit critically matched devices, even
when 
>> specifically instructed to do so. They will always take the easy
(cheap) 
>> way out. As a consequence, the performance and reliability of the
product 
>> will suffer. I know. I've seen the messes that have been created by 
>> second rate techs, who think they know it all.
>>
>> All the schematics in the world will not help, as long as techs think 
>> they know more than Peter does about his own product.
>>
>> I know, from my own experience, that some high Global NFB products 
>> benefit from the use of matched devices. In a product with no Global
NFB, 
>> the im****tance of matching becomes far more crucial.
>
> Gawd TW, You have dug yourself a hole so deep that you will never get
out 
> of it  now, no matter what.
>
> Why not go away & have a good think about the logic, or rather, the lack

> of it in what you have said, and then come back & TELL THE TRUTH, THE 
> WHOLE TRUTH & ONLY THE TRUTH to the other members of this group.
>
> You will gain at least some respect; more than if you just keep banging 
> away at the same old gong, which is now badly dented & in need of 
> replacing.

**Be specific and I will do my best to answer.

Trevor Wilson