Re: What value pot?

Use the 50k.  Once you figure out how much attenuation then measure the pot

with your meter.  Get some resistors and solder them into cables near the 
preamp.  If you try you should be able to cover the resistors with the 
existing cable ****elding, just strip back a ways and plan accordingly. 
Otherwise you have those pots sitting out in the open picking up stray 
noise.

"---MIKE---" <twinmountain@[EMAIL PROTECTED]
> wrote in message 
news:8186-481CAB79-425@[EMAIL PROTECTED]
 new digital FM tuner puts out too strong a signal compared to my
other inputs (TV and CD).  I want to install a dual pot between the
tuner and preamp to reduce the volume.  What is the best value pot to
use for this.  I have ordered 50K, 100K, 250K and 500K from Mouser (the
pots are cheap - the ****pping is not).


                  ---MIKE---
>>In the White Mountains of New Hamp****re
 >> (44° 15'  N - Elevation 1580')