Re: Amplifier Problem - Revised Schematic

In article
<7a5f62ce-00ec-4fac-84f3-838743faa613@[EMAIL PROTECTED]
>,
EADGBE <hwbosshoss@[EMAIL PROTECTED]
> wrote:
>In the interest of clarification, I have added some information to the
>schematic of the tape deck headphone amp that I'm having problems
>with.
>
>Some circuit paths are now labeled:
>
>http://i240.photobucket.com/albums/ff58/eadgbe123/amplifier-1.jpg
>
>As always, the points at which voltage readings are marked with a star
>are NOT producing the voltage indicated.  The +7V location is
>measuring 131mV instead.  The other two points where a star is
>indicated are measuring between 20mV and 30mV (fluctuating slightly).
>
>I am starting to think that a circuit OUTSIDE of this circuit might be
>at fault, because NOTHING inside of this circuit seems to be
>faulty...but the darn thing still WILL NOT work.

Where did you get this diagram. Is it completely from scratch ?


greg