"EADGBE" wrote ...
> HERE IS MY QUESTION: Although I can determine, through process of
> elimination, which wires are paired with which speaker, I still don't
> know how I can prevent wiring one or more speakers in each enclosure
> out of phase. I can get each of the three speakers in each enclosure
> to start "making some noise", but I don't know how to observe the
> proper "polarity" of each speaker so that all speakers in both of the
> enclosures will be in phase.
>
> Is there some method to "blindly" connect speakers in order to get the
> phase correct?
You didn't mention whether you could *see* the speaker
cones. If you can, using a 1.5v cell will easily tell you
which wires are speaker pairs, and what the polarity is.
If you can't see the speakers, you can try pairs of them
one way and then the other to *hear* the effect of in
vs. out of phase. It should be pretty obvious with
some audio signals.
|
