by I. Care <icare@[EMAIL PROTECTED]
>
Apr 16, 2008 at 05:28 PM
In article <19740-48067E9D-90@[EMAIL PROTECTED]
>, MLB5611
@[EMAIL PROTECTED]
says...
> When installing speakers and the wiring tangs are _not_ marked for
> positive and ground (+/-) does it matter which speaker tang is chosen
> for ground (-)? - Mike
>
>
Yes. Hook a small battery 1.5v with a couple of wires attached
momentarily to the speaker terminals and see if the cone moves forward
or back. If it moves forward you have the battery negative and hooked
up correctly, and obviously if it moves backward you have the leads
reversed.
--
I. Care
Address fake until the SPAM goes away ;-}
