Re: Need help in replacing headunit in 2000 Camry XLE

" Frank" <noreplay@[EMAIL PROTECTED]
> wrote in message 
news:ZqWdndwZ7oKUuGzanZ2dnUVZ_quhnZ2d@[EMAIL PROTECTED]
> The 2000 Camry XLE has the premium JBL sound system with a separate amp.

> The existing Camry radio/6 CD changer went south and I'm replacing it
with 
> a new head unit. So I have questions:
>
> 1    Is the amp located behind the glove compartment for the 2000 Camry 
> XLE?
>
> 2    Where can I get pinout and interconnection diagram information for 
> the XLE? I might just ended up tracing the wires one by one, but if 
> information is available, I would appreciate it.
>
> 3    The new headunit has preamp outputs for both the front and back 
> speakers. Is it better to use the existing JBL amp or use the integrated

> amp on the headunit? Ok, I could try it both ways and found out, assume
I 
> get this far.
>
> I've Googled and found very little information on the XLE relative 
> switching the JBL sound system to a conventional headunit so thank you
in 
> advance for any instructions or advice.
>

I believe there is a amp bypass harness on the right side inside the dash 
where you removed the radio.
The bypass harness is the standard Toyota harness
Then you can use the standard Toyota harness (metra 70-1761) to wire to 
aftermarket unit