On Feb 24, 2:52=A0am, Lee <Lee.359...@[EMAIL PROTECTED]
> wrote:
> boardjunkie;2276775 Wrote:
>
> > I have one of these [ ... ] I can get it to power up, but cannot
> > identify which wire is for memory and which is the power ..
>
> If you've managed to get it powered up, and if I recall correctly there
> are only 4 wires (Accs, BATT, rem and ground) then set a preset, then
> remove one of the two wires you're using for power for a few seconds,
> the repower the unit and see if you've lost the preset -- if not, the
> one that remained powered is the Battery contant.
>
> Here's the manual for that unit (free at
kenwoodusa.com)http://tinyurl.com=
/2782wk
>
> greetings
>
> --
> Lee
> ------------------------------------------------------------------------
> View thread:http://stage.caraudioforum.com/vb/showthread.php?t=3D296837
>
> CarAudioForum.com - Usenet Gateway w/over TWO million posts online!
Ahh...thanks for the manual link. I looked for it but only saw the one
for the larger electronic EQ. Looks like it stores presets internally
since there's only acc pwr, dimmer, and control leads.
|
