by "Richard Crowley" <rcrowley@[EMAIL PROTECTED]
>
Mar 11, 2007 at 05:39 PM
<nimbiotics@[EMAIL PROTECTED]
> wrote ...
> I've got an amplified signal from a 40watts stereo amplifier. I need
> to feed this to a device that will only receive preamplified signal.
You can use one of the attenuators that the car audio
installers use to take power amplifier outputs and feed
into line-level inputs. Like these...
http://www.part***press.com/webpage.cfm?webpage_id=3&CATID=35&ObjectGroup_ID=743
They call them "High/Low Adapters"
Or you could make your own with a few resistors for
less than it costs you to buy a cup of coffee.
