Re: More thoughts on gain settings

"Mike Dobony" <sword@[EMAIL PROTECTED]
> wrote in message 
news:2brbgaz4it8k$.12r5yjxibm55x$.dlg@[EMAIL PROTECTED]
 >> *just to clarify my terms - by preamp stage I mean any in-line
amplifier
>> circuit intended to drive a following circuit, and not a speaker.
>
> Both are true.  If you set each channel's gain to their proper setting,
> around zero when PFL'ing each, then you will maintain good gain at the
> channel fader and the main fader.  This is fine for only a few channels,
> 2-3, but as you add channels then the combined signals increase the
total
> signal strength at the mains.  To compensate for this you need to adjust
> each individual channel to a negative setting.

Bull****.

This is only true on low end MI grade desks. No professional mixing desk 
would have those problems.

Then again I suppose low grade MI gear is all you ever use or ever will
use. 
Given the crap you post on here no real pro would ever hire you.

Phildo