Confused signals. Set-up: Yamaha 01v, La-24 amplifier set to stereo,
2 core speaker cable/speakon connectors, non-descript Full range
Soundhouse speakers (450w, 8ohm, passive cross-over).
I send signal to Aux 1 on mixer, Ok. I mute aux 1 and send to Aux 2,
signal heard at both speakers. Sometimes, Aux I1 plays up and sound
appears at both speakers.
I swapped Aux1-2 for 3-4. Aux 3 ok, Aux 4 gives sound at both
speakers. If one speaker is disconnected when both are giving audio
from one aux send, BOTH speakers go silent. After pu****ng and pulling
cables etc, the problem clears for a while and all is as it should
be=85=85=85=85is there a rational explanation? Nothing is linked at the
mixer or amp intentionally.
|
