Philippe Lemaire wrote:
> I did open :-( !
>
>
> Both wires are broken although a plastic layer is still intact...
> The other is at right angle of it !
>
> Any suggestion as to let the current flow again ?
>
> Silver paint ?
>
>
> Philippe
Alas, no suggestions... It has been a few years since I took a look
inside a Deck (Easier to look into) and even more since I messed with a
****table (I did not fully open it, worked "****p in a bottle" style)
Thus, Though I recall what I had to do... The finer points are lost.
I would say to inspect to insure they are truly broken than do what you
got to do. You may be able to use very fine magnet wire to bridge a
gap.You may also need to "Anchor" the headin some way. Again, not much
in the way of suggestions, A thing strip of flexible plastic may work
for that.. Glued to the top of the head and to the carrier.
However I do not know.. Think of this as a suggestion for investigation.
If you succeed... let us know what it took,, Photos please.
|
