Philippe Lemaire wrote:
> As it can blank the disc, I can suppose the head still warms...
> I will start with some alcohol cleaning and see !
Ok, well I"m not sure if just the laser can blank the disk
But take a good close look at the overwrite head (top head) it needs to
be parallel to the disk when recording, slightly lifted if not recording.
I have seen them get bent out of position when a disk is inserted wrong,
I've seen broken wires on the head (it is sup****ted on 2 wires, both
need to be there as they both carry current)
I've managed to reposition them a couple of times but this is NOT a
procedure I'd suggest you try except as a last resort.
|
